T-1600S High-speed and High-efficiency Wheel Hub Machining Center

Item			Unit	Parameter	Remark
Travel	Table travel (X axis)		mm	1600
	Saddle travel (Y axis)		mm	550
	Headstock travel (Z axis)		mm	450
	Distance from spindle end face to worktable surface		mm	100-550
	Distance from spindle center to column guide		mm	632
Worktable	Table size		mm	1700*550
	Max. load		kg	500
	T-shaped slot (number of slots-slot width*spacing)		mm	5-18*100
Spindle	Motor power (rated/short time)		kW	3.7/5.5
	Spindle torque (rated/short time)		N.m	14.1/21.0
	Spindle motor speed		rpm	20-20000
	Spindle diameter		mm	Ф100
	Spindle taper		/	BT30
Guide	X-axis		/	35
	Y axis		/	35
	Z axis		/	45
Drive	Screw specifications X, Y, Z		mm	4020/4012/4012
Drive	Motor power X/Y/Z		kW	3.0/3.0/3.0
Speed	Cutting feed speed range		mm/min	1-15000
Speed	X/Y/Z axis rapid traverse speed		m/min	30/36/36
Accuracy	Positioning accuracy (X)		mm	0.015	GB/T 18400.4 (Full travel)
	Repeatability (X)			0.008
	Positioning accuracy (Y/Z)			0.01
	Repeatability (Y/Z)		mm	0.006
Tool magazine	Tool magazine capacity		T	21
	Max. tool weight		kg	3
	Max. tool length		mm	250
	Max. tool diameter (full /adjacent empty)		mm	Ф60/Ф80
Other	CNC system			Mitsubishi M80VB
	Air supply	Flow	L/min	≥200（ANR）
	Air supply	Air pressure	MPa	0.6-0.8
	Total power capacity		kVA	20
	Coolant tank volume		L	400
	Machine tool dimensions (lengthwidthheight)		mm	41503750 (including 700 steps)2950	Corresponding to XYZ axis
	Machine weight (approx.)		kg	6450